Lapidary Slab Saws
Raytech, Barranca Diamond, Lortone and Covington Lapidary Slab Saws - Rock Saw
Toll Free Order Line 800-844-3237
All equipment listed on our website is 110V unless otherwise stated

Home Products & Services Equipment Tools & Supplies

Barranca Diamond
Highland Precision 14 Inch Slab Saw
Shipped ground freight. Please call or email for current lead time and freight charges.

Highland Precision 14 Inch Slab Saw
  • 3/4 HP continuous duty commercial grade motor with thermal overload protection and manual reset
  • Fully sealed drive shaft bearing housing
  • Heavy duty cast iron carriage and rock vise
  • Screw drive vise carriage with automatic shutoff
  • Silicon bronze clutch block carriage feed engagement system
  • Gear drive motor provides feed rate of 3/16 inch per minute
  • Powder coated reservoir and hood
  • Splash-style lubrication, flushing and cooling system
  • Includes a 14" 301 Supreme notched rim diamond blade
Motor: Baldor
Power: 3/4 HP - 110V
Amperage: 8
Blade Capacity 14"
Depth Of Cut 5"
Vise Opening 5-3/4"
Blade Included 14" 301 Diamond Blade
LxWxH 41" x 27" x 19"
Saw Weight 170 lbs.
Shipping Weight 230 lbs.
(Reg. $2,642)

Optional HP-14 Saw Stand
Call To Order

Complete Covington 10" Slab / Trim Saw
A Clean Operating Saw Ideal for Trimming Rocks, Minerals and Glass
Covington is one of the oldest and most respected manufacturers in the industry!

Covington 10 inch Trim and Slab Saw
  • Cast aluminum table top & tank 
  • 3 3/4" Roller bearing slab vise with bull dog grip 
  • Accurate cross feed adjustment 
  • Hold down hook keeps rock from climbing blade 
  • Adjustable blade guard 
  • 1/3 HP Motor 
  • Power feed
  • Covington Gold Series Diamond Saw Blade
  • Hood
Bull dog grip vise holds all rock shapes and swings back out of the way for hand trimming. Cross feed slabs for 3 1/2". Just pull the vise back and set to scale to get the slab thickness you want. Hold down hook (patent pending) runs under table top so rock can't climb the blade or jam. Front shield protects operator from cutting waste while trimming.
Arbor has 5/8" diameter steel shaft. Ball bearing assembly has grit slinger to protect precision bearings. Twin drains allow quick and easy cleaning of coolant sump. Piggy back motor mounts directly on back tank casting. Unit rests on rubber cushions for quiet operation.
All units come with operating instructions and guarantee.
28"x18"x15". Apx. shipping weight is 60 lbs.
Sale Price

(list: $1220.00)


Covington Heavy Duty Slab SawsCovington Heavy Duty Slab Saws
High Performance Saws For Cutting Glass or Stone
Heavy Duty Slab Saw Features:
  • Powder coated, heavy welded steel chassis with separately welded inner frame to eliminate warping.
  • One piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads.
  • Quick return system which allows carriage to be manually returned to any position.
  • Six speed power feed with automatic shut-off.
  • Over-running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone.
  • Cross feed which permits 8" of material to be slabbed without re-clamping.
  • One piece arbor and flange mounted in housing with grit slinger.
  • Heavy duty ball bearings, neoprene sealed and greased for life.
  • Completely assembled with vise, motor and Covington's Best Diamond Blade.
  • *Motors - 110v, 60hz. Except Models 198 & 199
  • *Models 198 & 199 Come Standard With 220v 60hz
Model Size L.W.H. Weight Vise  H.P. - V Blade List Price Sale Price
703HDS 42"X39"X49" 325 lbs 9" 1/2 - 110V 18" X .085 $4,975 $4,228 Call To Order
707HDS 46"X39"X49" 345 lbs 10" 3/4 - 110V 20" X .085 $5,375 $4,564 Call To Order
712HDS 64"X42"X58" 395 lbs 12" 1 - 110V 24" X .100 $6,350 $5,394 Call To Order
717HDS 64"X42"X58" 425 lbs 18" 1 - 110V 24" X .100 $6,600 $5,599 Call To Order
198HDS 67"X44"X60" 675 lbs 18" 1-1/2 - 220V 30" X .125 $9,075 $7,259 Call To Order
199HDS 90"X48"X64" 1200 lbs 26" 2 - 220V 36" X .200 $13,200 $10,559 Call To Order
Covington Slab Saws are shipped factory direct by ground motor freight.  Please call us toll free at 800-844-3237 for a freight quotation or to place an order.

Lortone Lapidary Slab Saws
For faster service Lortone saws are shipped factory direct.
Please email or call for lead time and estimated freight charges.
Lortone slab saws are meticulously designed and constructed for long life and ease of operation. Designed for use with oil as a coolant to deliver the best in cutting speed and blade life.
Note: Using water or water soluble oils in these saws will result in unsatisfactory performance in most cases. Oil not only provides coolant for the blade but also lubricates the feed mechanism.
Lortone LS12C Slab Saw

Lortone LS12C Slab Saw This quiet, fully enclosed, professional quality 12" saw is a real workhorse. It features a  fixed rate power feed with full hinged hood to reduce oil mist. Large capacity vise can hold up to 5" x 6-1/2" rough. The coolant tray detaches for easy cleaning. Includes 12" .062 x 5/8" Blade and 1/3 hp motor with overload protection.
Call For Shipping Options and Rates
(reg. $1,550.00)

Lortone Panther LSS14-P Slab Saw

Lortone LSS14-P Slab Saw This remarkable 14" high performance Slab Saw delivers straight, smooth cuts in the hardest agate, quartz or wood at twice the speed of standard saws. A quiet clean bench top saw that doubles cutting capacity without doubling cost or space. Fixed rate power feed delivers cuts at 15" per hour. Sealed high performance bearings, a rugged 5" x 6 1/2" capacity vise, and threaded cross feed, are all standard. Requires 2 1/2 gallons of coolant oil. COMPLETE with 14" x 5/8" blade, 1/2 hp motor and built in blade sharpener.
Call For Shipping Options and Rates
(reg. $1,885.00)

Lortone LS18

Lortone LS18 Slab Saw A rugged, accurate, economical 18" slab saw proven by years of trouble free performance in commercial operations. Slabs material up to 7" x 7" easily and cleanly. It's free standing design allows it to go next to a work bench and it's easy access design makes loading and setup simple. The frame, drive guard, and tank are of heavy gauge welded steel for long life. The hinged hood provides easy access when open and the side window allows convenient monitoring of the cut. Adjustable feed rate, 9 1/2" - 19 1/4" per hour, and threaded cross feed makes it easy to use. Features automatic cutoff and safety switches, double sealed ball bearings, 3/4" arbor, and 2" drain. Shipped complete and assembled, ready to use. COMPLETE with 18" x .125" x 3/4" blade and 1/2 hp motor.
Call For Shipping Options and Rates
(reg. $3,750.00)

Credit Card Logos

Contact UsPlease Tell A Friend About Dad's Rock ShopPolicies

Dad's Rock Shop
Store Address and Hours

Toll Free Order Line 1-800-844-3237
Information (928) 788-2513 Fax (775) 924-7889

Products and prices subject to change without notice.
The above prices do not include shipping charges. AZ. residents subject to 5.85% sales tax.

Copyright  Dad's Rock Shop - All Rights Reserved