Cork and Felt Glass Polishers
Toll Free Order Line 800-844-3237
All equipment listed on our website is 110V unless otherwise stated

Home Products & Services Equipment Tools & Supplies
Larger ImageCovington 10" Cork & Felt Glass Polisher
Covington 10 Cork & Felt Glass Polisher
Model 5050GP
  • Back Plate with Spray Nozzle
  • Powder Coated Pans Resist Rust
  • Adjustable Sponge Bench to Minimize Splash
  • Removable Side Panels for Easy Wheel Change
  • Heavy Duty Ball Bearings, Neoprene Sealed and Greased for Life
  • Motor: 110V, 60Hz
The 10" Cork and Felt Glass Polisher is designed for coldworking glass to a high polish. The cork wheel combined with mildly abrasive pumice will pre-polish the work piece. The felt wheel combined with cerium oxide will bring the piece up to a high polish. The arbor can be quickly disassembled (4 bolts) for pulley change or bearing inspection. A water valve and spray nozzle are built in for easy hookup. The water valve takes 1/4" OD plastic tubing for gravity water flow or 1/4" copper tubing for pressure systems. Unit comes with one (1) 10" x 2" cork wheel and one (1) 10" x 2" felt wheel installed, dressed, and factory tested for balance. The felt wheel is installed with a metal side support. Wheels turn at 420rpm to minimize polish powder loss, while a rim speed of 1,230SFM creates the friction necessary for a brilliant finish. This model ships fully assembled with belt guard, 1/3hp, high-torque motor, instructions, and product guarantee.
Shipping Weight: 95 lbs.
$1,115.00
Quantity: 

 
 
Larger Image16" Cork & Felt Glass Polisher
This item ships ground freight. Please call us for a freight quote and to place your order.
800-844-3237
16 Cork & Felt Glass Polisher
Model 5016GP
  • 1/3hp, High Torque Motor
  • Back Plate with Spray Nozzle
  • Powder Coated Pans Resist Rust
  • Removable Tank for Easy Wheel Change
  • Adjustable Sponge Bench to Minimize Splash
  • Heavy Duty Ball Bearings, Neoprene Sealed and Greased for Life
  • Motor: 110V, 60Hz
The 16" Cork and Felt Glass Polisher is designed for coldworking glass to a high polish. The cork wheel combined with mildly abrasive pumice will pre-polish the work piece. The felt wheel combined with cerium oxide will bring the piece up to a high polish. The arbor can be quickly disassembled (4 bolts) for pulley change or bearing inspection. Water valve and spray nozzle are built in for easy hookup. The water valve takes 1/4" OD plastic tubing for gravity water flow or 1/4" copper tubing for pressure systems. Unit comes with one (1) 16" x 3" cork wheel and one (1) 16" x 3" felt wheel installed, dressed and factory tested for balance. Wheels turn at 280rpm to minimize polish powder loss, while a rim speed of 1,173SFM creates the friction necessary for a brilliant finish. This model ships fully assembled with belt guard 1/3hp motor, instructions, and product guarantee.
Shipping Weight 140 lbs.
This Item Ships Ground Freight
$1,895.00

 

Credit Card Logos

Contact UsTell A Friend About Dad's Rock ShopPolicies

Dad's Rock Shop
Store Address and Hours

Toll Free Order Line 1-800-844-3237
Information (928) 788-2513 * Fax (775) 924-7889

The above prices do not include shipping charges.
Products and prices subject to change without notice. AZ. residents subject to 5.85% sales tax

Copyright (c) Dad's Rock Shop - All Rights Reserved